Home › Applications › Heavy haulage
Application · Heavy haulage
Axle load meters for heavy-haulage vehicles
In Germany, vehicles with an exemption under § 70 StVZO are generally required to carry axle load meters. The air suspension scale shows every axle load and the total mass – retrofit kit, calibrated by you without a workshop.
What applies to heavy haulage in Germany
A vehicle that exceeds the axle loads or total masses of § 34 StVZO needs an exemption under § 70 StVZO. The nationwide recommendations for these exemptions state (translated):
“If the provisions of § 34 StVZO on axle loads or total masses are exceeded, axle load meters on the vehicle shall generally be required …”Recommendations on § 70 StVZO, No. 4.1 – Verkehrsblatt, issue 12/2014
Since 1 January 2016 this has been written into exemptions nationwide as a condition for vehicles with air-sprung or hydropneumatically sprung axles. The axle load meters are used for checking and do not need to be calibrated for legal metrology. Electronic systems that measure air suspension pressure and display the axle loads are explicitly considered suitable – exactly how the air suspension scale works.
In addition, for every trip: under the German guidelines for oversize and heavy transports, a transport may only start once it has been checked immediately beforehand that the permitted axle loads and total mass are complied with.
These rules apply in Germany. Austria and other countries have their own regulations. The conditions and requirements in your own permit always apply.
What the system offers
In use



Frequently asked questions
Does the axle load meter need to be legal for trade?
No. The axle load meters are used for checking and do not need to be calibrated for legal metrology. The air suspension scale has an accuracy of 1–2 %, depending on suspension and axle arrangement.
When is an axle load meter required?
In Germany, generally when a vehicle needs an exemption under § 70 StVZO because axle loads or total mass under § 34 StVZO are exceeded. The condition in your permit is decisive.
Does it also work with leaf-sprung axles?
Yes. Axles with mechanical suspension are measured with a height or gyro sensor. The matching sensor is included in the installation kit.
How long does installation take?
Between 1.5 and 5 hours, depending on vehicle and configuration. You can install it yourself, have your workshop do it, or we can do it for you.
Goes well with
Which installation kit fits your tractor?
Tell us the vehicle, number of axles and suspension – you will receive a quote.