Go to content
Skip menu

Home › Applications › Tippers & construction

Tipper truck with LFW-ESP-20 axle load display on the frame

Application · Tippers & construction

Axle load scale for tipper trucks

See when your tipper is full while loading with an excavator or wheel loader – every axle and the total weight. Retrofit kit, calibrated by you without a workshop.

Why a scale on a tipper?

Gravel, soil, excavated material or concrete: how heavy a bucket is depends on the material and its moisture. Loading by eye, a tipper is quickly overloaded – or it drives with half its payload. And often it is not the total weight that is the problem, but a single axle.

An air suspension scale measures the pressure in the air bellows and converts it into axle loads and total weight. Leaf-sprung axles are measured with a height or gyro sensor. So you can see while loading whether one more bucket fits.

What the system offers on a tipper

Readable from outsideThe LFW-ESP-20 sits on the frame, with 20 or 40 mm digits – easy to read next to the vehicle while loading.
Every axle individuallyUp to 5 axles on the truck. You see every axle load and the total weight – also on three- and four-axle trucks.
Air and leaf/air suspensionFor tippers with air/air or leaf/air suspension. Leaf-sprung axles are measured with a height or gyro sensor.
Display in the cabEither the LFW-ESP-DIN in the radio slot or the LFW-ESP-M5 mobile touch display as an additional display.
Rugged for the building siteMeasuring unit in a sturdy protective housing on the frame – made for outdoor use.
Calibrate yourselfCalibration directly on the device or with the IR remote control. When you change vehicles, simply move the system over.

In use

MAN tipper with LFW-ESP-20 on the frame
MAN tipper – display on the frame behind the front wheel
Volvo tipper with LFW-ESP-20 on the frame
Volvo tipper – display next to the air tanks
Axle load display behind the cab of a construction truck
Construction truck – display behind the cab
Four-axle tipper with LARCH measuring unit on the frame
Four-axle tipper – measuring unit on the frame above the tank

Typical set-up

  1. Tipper: LFW-ESP-20 on the frame – readable from outside while loading.
  2. Cab (optional): LFW-ESP-DIN in the radio slot or LFW-ESP-M5 as a mobile display.
  3. Trailer (optional): LFW-ESP-20 on the trailer – the values are sent to the cab by radio.

Which combination fits depends on the number of axles and the suspension. With a few details in your enquiry we put together the right installation kit.

Frequently asked questions

How accurate is the scale?

Accuracy is 1–2 %. It depends on the vehicle configuration, such as suspension and axle arrangement. The display is intended for checking during loading and is not legal for trade.

Does it also work with leaf-sprung axles?

Yes. Axles with leaf/air suspension are measured with a height or gyro sensor. The matching sensor is included in the installation kit.

Can the excavator operator see the weight?

Yes. The LFW-ESP-20 sits on the outside of the frame and has 20 or 40 mm digits – easy to read even from a distance.

How long does installation take?

Between 1.5 and 5 hours, depending on vehicle and configuration. You can install it yourself, have your workshop do it, or we can do it for you.

Goes well with

Which installation kit fits your tipper?

Tell us the vehicle, number of axles and suspension – you will receive a quote.

Luftfederwaagen Larch e.U. Entgasse 552, 6232 Münster, Austria
© Luftfederwaagen Larch e.U.
Back to content