Home › Applications › Semi-trailer trucks
Application · Semi-trailer trucks
Axle load scale for tractor units and semi-trailers
Axle loads of tractor unit and semi-trailer at a glance – the trailer values are sent wirelessly to the cab. Retrofit kit, calibrated by you without a workshop.
Why a scale on an articulated truck?
On an articulated truck the load is shared between the semi-trailer axles and, via the fifth wheel, the drive axle of the tractor unit. If the load sits too far forward, the drive axle is quickly overloaded – even if the total weight is still fine. If it sits too far back, the drive axle lacks load.
An air suspension scale measures the pressure in the air bellows and converts it into axle loads and total weight. The semi-trailer has its own measuring unit that sends the values to the tractor unit by radio. So you can see every axle while loading – and distribute the load correctly in time.
What the system offers on an articulated truck
In use




Typical set-up
- Tractor unit: LFW-ESP-DIN in the radio slot or LFW-ESP-20 on the frame – measures front and drive axle.
- Semi-trailer: LFW-ESP-20 on the frame – measures up to 4 axles and sends the values to the tractor unit by radio.
- Additional display (optional): LFW-ESP-M5 as a mobile touch display.
Which combination fits depends on the number of axles, the suspension and the fifth wheel. With a few details in your enquiry we put together the right installation kit.
Frequently asked questions
How do the semi-trailer values get to the cab?
By radio. The LFW-ESP-20 on the semi-trailer measures the trailer axles and sends the values wirelessly to the unit in the tractor. No extra cable across the fifth wheel is needed.
Can I equip only the semi-trailer?
Yes. The LFW-ESP-20 on the semi-trailer shows the axle loads on the outside of the frame – even without a unit in the tractor.
My tractor unit has a leaf-sprung front axle – does it work?
Yes. With a fixed fifth wheel a sensor on the front axle is usually not needed – the front axle load is calculated from the drive axle load. With an adjustable fifth wheel a height or gyro sensor measures it.
How accurate is the scale?
Accuracy is 1–2 %. It depends on the vehicle configuration, such as suspension and axle arrangement. The display is intended for checking during loading and is not legal for trade.
How long does installation take?
Between 1.5 and 5 hours, depending on vehicle and configuration. You can install it yourself, have your workshop do it, or we can do it for you.
Goes well with
Which installation kit fits your articulated truck?
Tell us the tractor unit, semi-trailer, number of axles and suspension – you will receive a quote.