Go to content
Skip menu

Home › Applications › Timber transport

Loaded timber truck with log trailer

Application · Timber transport

Axle load scale for timber trucks

See how heavy your truck and trailer are while loading with the crane – every axle and the total weight. Retrofit kit, calibrated by you without a workshop.

Why a scale for timber transport?

Logs are hard to estimate: species, length and above all moisture change the weight a lot. Freshly felled timber is considerably heavier than seasoned wood. Loading by eye means either driving overloaded or giving away payload.

An air suspension scale measures the pressure in the air bellows and converts it into axle loads and total weight. Leaf-sprung axles – such as the front axle – are measured with a height or gyro sensor. So you can see while loading in the forest whether one more log fits.

What the system offers for timber transport

Display at the craneThe mobile display is available as LFW-ESP-M5_SG in a waterproof housing – for example at the crane seat. You see the weight right while loading.
Wireless trailerThe trailer weights are sent to the cab by radio. No cables between truck and trailer.
Turntable, tandem, semi-trailerSuitable for turntable (drawbar) and tandem trailers as well as semi-trailers, up to 4 axles on the trailer.
Every axle individuallyUp to 5 axles on the truck. You see every axle load and the total weight of truck and trailer.
Rugged frame mountingThe LFW-ESP-20 sits in a sturdy protective housing on the frame – made for outdoor use.
Calibrate yourselfCalibration directly on the device or with the IR remote control. When you change vehicles, simply move the system over.

In use

LFW-ESP-M5_SG in a waterproof housing at the crane control stand
LFW-ESP-M5_SG at the crane control stand – weight in view while loading
Measuring unit on the frame of a timber trailer
Measuring unit on the timber trailer – data sent to the cab by radio
LFW-ESP-DIN in the radio slot of the cab
LFW-ESP-DIN in the radio slot – truck and trailer weights in the cab
LFW-ESP-20 with LED display on the frame behind the cab
LFW-ESP-20 on the frame – easy to read while loading
DAF XF timber truck with LFW-ESP-20 behind the front wheel
DAF timber truck – display behind the front wheel

Typical set-up for a timber truck and trailer

  1. Truck: LFW-ESP-DIN in the radio slot of the cab or LFW-ESP-20 on the frame.
  2. Trailer: LFW-ESP-20 on the trailer – the values are sent by radio to the unit in the truck.
  3. Crane (optional): LFW-ESP-M5_SG in a waterproof housing as an additional display.

Which combination fits depends on the number of axles and the suspension. With a few details in your enquiry we put together the right installation kit.

Frequently asked questions

How accurate is the scale?

Accuracy is 1–2 %. It depends on the vehicle configuration, such as suspension and axle arrangement. The display is intended for checking during loading and is not legal for trade.

Does it also work with a leaf-sprung front axle?

Yes. Axles with leaf/air suspension are measured with a height or gyro sensor. The matching sensor is included in the installation kit.

Can I see the weight directly at the crane?

Yes, with the LFW-ESP-M5_SG mobile display in a waterproof housing. It shows the truck, the trailer or both, with freely adjustable limits and colour warning.

How long does installation take?

Between 1.5 and 5 hours, depending on vehicle and configuration. You can install it yourself, have your workshop do it, or we can do it for you.

Goes well with

Which installation kit fits your timber truck?

Tell us the vehicle, number of axles and suspension of truck and trailer – you will receive a quote.

Luftfederwaagen Larch e.U. Entgasse 552, 6232 Münster, Austria
© Luftfederwaagen Larch e.U.
Back to content